Head, Air Filter, Nozzle Shaft, Nozzle:

The places to pay attention to are: whether the filter core itself is clean, deformed and damaged

Note the following: The Buffer is smooth

Note the following: Whether the O-Ring is damaged

Things to look out for are: Leaf Spring deformation

Points to note are: Whether the nose is cracked or stained with tin

Note the following: The Buffer is normal

X: Ball Screw X: ball screw

Pay attention to: whether the surface is dusty

Pay attention to: whether the surface is dusty

Y: Straight guide rails

Pay attention to: whether the surface is dusty

Pay attention to: whether the surface is dusty

z-axis

Pay attention to: whether the surface is dusty

Pay attention to: whether the surface is dusty

w-axis

Track belt

Places to pay attention to are: whether the surface is stained with dust or there are parts

Things to look for: tightness

Things to look for: tightness

Solenoid valve

Places to pay attention to are: whether the solenoid valve has a role

Points to note are: Whether the Air Joint is damaged

Note: Whether there are parts on the Feeder Plate

Visual system

The places to pay attention to are: there is no dust in the lens

Points to note are: Whether the signal line is connected properly

Points to note are: LED brightness

Places to pay attention to are: whether there is dust on the LED

The places to pay attention to are: there is no dust in the lens

Points to note are: Whether the signal line is connected properly

Points to note are: LED brightness

Places to pay attention to are: whether there is dust on the LED

The places to pay attention to are: there is no dust in the lens

Points to note are: Whether the signal line is connected properly

Points to note are: LED brightness

Places to pay attention to are: whether there is dust on the LED

Leaf Spring: Check whether Leaf Spring is deformed and replace it if necessary

Feeder Plate: Check whether there are parts on the Feeder Plate

Multi Vision Camera: Checks the lens for dust or parts

Single Vision Camera: Check the lens for dust or parts

Nozzle Shaft: checks whether the Buffer is smooth. If no, nozzle shaft. You can put some lube on

Moving Camera: Check the lens for dust

X-axis -Ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil

X-axis linear slide: Check whether the surface is stained with dust or parts, and clean it if necessary; Fresh oil

Ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil

Y-axis linear slide: Check whether the surface is stained with dust or parts, and clean up if necessary; Fresh oil

Z-ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil

Z-axis linear slide to check whether the surface is stained with dust or parts, if necessary to clean; Fresh oil

W-ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil

Air Joint: Check whether the internal Y-Packing and O-Ring are deformed, and replace them if necessary

Nozzle Shaft: Check whether the O-Ring on the Shaft is deformed. If yes, nozzle shaft is deformed. Please replace it

Moving Camera LED Lighting: Adjust the LED brightness, if can not be adjusted, please replace the LED Light device

X-axis -Ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

X-axis linear slide: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

Y-ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

Y-axis linear slide clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

Z-axis -Ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

Z-axis linear slide: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

W-ball Screw: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand

Feeder Valve: Press the red envelope button on the solenoid valve and see if it works properly

Track conveyor belt: Check whether the belt is broken, adjust the tightness, and replace it if necessary